ptfe hose dn 16 x 44o mm

Hose clamp one piece 119 - Dietzel Hydraulik

Order no. Order no. old * DN for Hose Typ "17A" clamping range d in mm Steel strip width b in mm Steel strip thickness s in mm 119-001 119-021023 21 - 23 18 0,6

Ptfe Pipe Fitting - Manufacturers & Suppliers, Dealers

PTFE Lined Elbow 90Dimensional DataSize DN 25 DN 40 DN 50 DN 65 DN 80 DN 100 DN 150 DN 200 DN 250 DN 300 F mm.. Product Details Payment Terms : Others, Cheque

SFL straight - Dietzel Hydraulik

PTFE Hose with Nobel - steel netting Convoluted PTFE hose Thermoplastic hoses MTH1 Suction and low pressure hose 14A DN in mm flange in inch C in mm min. D in mm B±3 in mm L±3 in mm 1.420-08-08 12 1/2 38,1 10,0 48 79 1.420-08 16 1/2 30,2 12,6

TECHNICAL SPECIFIIONS

Hose cores will include the prefix H. (i.e. HC06). Tube OD is given 1/8” incre-ments or mm. Hose cores are given in 1/16” increments. / Separator only if unheated tubes are present X# Unheated tube(s) using same method as heated tubes. - Separator See tracer

Master-Clip PTFE H EL | Chemical-Resistant Hoses | …

DN op. pressure vacuum bend radius weight/m old article no. **new article no. production length max. production length bar bar mm kg m m 38 0,94 0,52 23 0,5 261-038-207 000369:38:x 3-10 20 40 0,93 0,51 24 0,5 261-040-207 000369:40:x 3-10 20 45 0,92 0,48 27

PTFE convoluted hose - PTFE convoluted hose Exporter, …

PLAIN PTFE FLEXIBLE HOSES DN Wall Thk Int.Dia Ext.Dia Pressure at 20ºC kg/cm² Min. Bend Radius mm inches mm mm mm Working Min. Burst mm 5 3/16" 0.7 5 7.6 203 810 55 6 1/4" 0.7 6.35 8.8 169 675 75 8 5/16" 0.7 8 11 144 576 100 13

AFLEX Hose Corroflon AS, corrugated PTFE hose with …

Find your Hose Corroflon AS, corrugated PTFE hose with spiral and stainless steel braiding at ERIKS. Choose from more than 500.000 products online and order right away. very flexible, corrugated PTFE suction and delivery hose with stainless steel braiding

// HOSE - ALFAGOMMA

Dimension how a hange ithou rio otice. 38 HOSE Item Code Dash mm inch mm inch Mpa psi Mpa psi mm inch kg/m lb/C ft 1000295 -4 6 1/4 11,5 0,45 35 5000 140 20000 50 1,97 0,09 6 1000483 -5 8 5/16 13,4 0,53 30 4300 120 17200 55 2

4SP SKIVE (440) - Dietzel Hydraulik

PTFE Hose with Nobel - steel netting Convoluted PTFE hose Thermoplastic hoses MTH1 Suction and low pressure hose 14A DN in mm DA in mm DI in mm DL in mm L in mm L1 in mm 440-04 06 21,7 11,5 15,5 37,0 14,6 18,1 38,9 3,0 12 28,5 17,5 21,1 3,0

MA2171: Hose Assely, Polytetrafluoroethylene, PTFE …

HOSE SIZE LENGTH (mm) DN 06 50.0 ± 6 DN 10 DN 12 63.5 ± 6 DN 16 DN 20 76.0 ± 6 DN 25TABLE 5 FIGURE 2 Add "AS1055 type IIb class B-S/P" to identifiion marking to show level of confidence, "fire proof" (15 min), with AS1055. The ends of the

AMERICA - Inicio

DN inch Size mm Type code inch mm Stainless / Mild steel inch mm Set 83C-R02 83C-R02H 83C-0CB 6 1/4 -4 6.3 R1AT 43-1/4 0.886 22.5 0.642 16.3 80C-C04 X 6 1/4 -4 6.3 R2AT 43-1/4 0.886 22.5 0.685 17.4 80C-C04 X X 6 1/4 -4 6.3 2SC 43-1/4 0.886 22.5 0

1.9 Hydraulic/Mechanical Installation Accessories

G 3/4 - DN 10 for PVC hose 24 x 16 83 pk_2_029 790191 1.9 Hydraulic/Mechanical Installation Accessories 1-48 Product alogue 2016 1.1.2016 Low-pressure Metering Pumps 1 PP/PTFE …

Hydraulic Hoses - SAE 100 R1 AT Hydraulic Hose …

Marking on the Hose: Ho 2SN DN 25 DIN/EN 853 - EXCEEDS SAE AT 1" - 25.4 MM - WP 16.Mpa-165Bar/2393PSI - MSHA Applicable Standards: SAE 100 R2 AT ( DIN EN 853 2SN ) Appliions: Medium - High pressure lines, Return Lines

ISO-KF Flanges | Pfeiffer Vacuum

14 x 2 mm 120FRA010-14-30 DN 10 ISO-KF 52 14 2 30 12.2 14 x 2 mm 120FRA010-14-52 DN 10 ISO-KF 70 14 2 30 12.2 14 x 2 mm 120FRA010-14-70 DN 16 ISO-KF 40 19.05 1.65 30 17.2 19.05 x 1.65 mm 120FRA016-19-40 DN 16 ISO-KF 30 20 2 30 17.2

Dimensions bride DIN - Filter Technics

16 x 52 300 A 440 445 460 485 515 530 585 585 690 D1 395 400 410 430 450 460 500 500 590 D2 365 370 378 395 410 410 410 410 410 n x d 12 x 22 12 x 22 12 x 26 16 x 30 16 x 33 16 x 36

FLEXILINE PTFE - Diflon

PTFE Chemical Transfer Hose Type DL smooth bore • Loose flanges • DN 15 - DN 50 - DN 1/2” - DN 2” • Flanges acc. to DIN 2501, PN 10 • Flanges acc. to ASME/ANSI B16.5 Class 150 • Rated for -40 C/ -40 F to +230 C/ +440 F Materials 1.1 Paste PTFE 1.2

M&C Tech Group | Blind plug PTFE G 1/8" | Gas sampling, …

Blind plug PTFE G 1/8" - Blind plug, G 1/8", material: PTFE Hose and tube screw connectors as well as fittings of series 1 to 3 out of plastic are indispensable and well-proven accessories in analytical technology in order to ensure a safe and gas-tight connection of

SFS 90° - Dietzel Hydraulik

PTFE Hose with Nobel - steel netting Convoluted PTFE hose Thermoplastic hoses MTH1 Suction and low pressure hose 1.471-16-12 19 1 47,6 14,8 65 60 99 1.471-12-16 25 41,3 20,0 72 68 114 1.471-16-16 …

Flange sight glass - All industrial manufacturers

DN: 16 mm - 315 mm Cepex offers the highest-level guarantee for all its PVC Fittings for pressurized fluid handling appliions. The extensive range of sizes and coinations we offer will accommodate any system design.

Flanschdichtung DN 50, 61 x 107 x 2mm, C 4400 …

Werkstoffe: C 4400, asbestfrei, Stärke 2 mm Temperaturbereich:-100 C bis +150 C (bei anwendungstechn. Überprüfung bis max. +400 C) Betriebsdruck: 40 bar (bei anwendungstechn. Überprüfung bis max. 100 bar), Druckstandfestigkeit 25 N/mm² Einsatzbereich: